KMParts.com is "THE" source for industrial automation control components

AT4/11-1/I/RS

Limit Switch-Narrow Enclosure

AT4/11-1/I/RS

Limit Switch-Narrow Enclosure

AT4/11-1/I/RS

Limit Switch-Narrow Enclosure

AT4/11-1/I/RS Limit Switch

Totally Insulated

  • Horizontal or vertical installation
  • Operating heads can be turned in 90 ° stages
  • Available in wide or narrow enclosures
  • Snap or normal actuation contacts
  • Overlap method of contact making
  • Use with more than 30 operators
Call for Quick Order
Quick Chat

*This product has been retired and replaced by a new part. Please contact us for new part information.

AT4/11-1/I/RS can be repositioned to adapt to horizontal or vertical installation. The operating heads can be turned in 90 ° stages to match the specified plane of actuation. For degree of protection IP 65, use cable gland M20 with a maximum connection thread length of 9.5mm (V-M20). Note: Care should be taken during mounting and operation that no foreign particles penetrate the entry point of the actuator element.

AT4 Oiltight Limit Switch AT4/11-1/I/RS

AT4 Oiltight Limit Switch AT4/11-1/I/RS

Contacts
Normally
Open
Normally
Closed
AT4/11-1/I/RS Limit Switch AT4/11-1/I/RS Limit Switch

The operating heads can be turned in 90 °
stages to match the specified direction of operation.

View More
1 1 AT4/11-1/I/RS
Contact Sequence AT4/11-1/I/RS Contact Sequence

Travel Diagram

AT4/11-1/I/RS Contact Sequence
Positive Opening
Clearance To
IEC/EN 60 947-5-1
AT4/11-1/I/RS Positive Opening Clearance to IEC/EN 60 947-5-1
<<< View All Models & Contacts >>>