Menu

Eaton
XTPEXTA032B
Trip Block

XTPEXTA032B Overload

XTPEXTA032B shown


XTPEXTA032B Trip Block

Description Setting Range
Overload Release
Old Moeller
Part Number
New Eaton
Part Number
Motor-protective circuit-breaker PKE,
Coordination type "1" and "2"
3.0...12.0A PKE-XTU-32 XTPEXTA032B


XTPEXTA032B Technical Data

Setting range
Overload releases   
Setting range ofoverload releases    Ir A 8 - 32
Overload release, min. Ir A 8
Overload release, max. Ir A 32
Function With overload release
Rated uninterrupted current = rated operational current Iu = Ie A 32
Motor rating
AC-3
220 V 230 V P kW 7.5
380 V 400 V P kW 15
440 V P kW 15
500 V P kW 18.5
660 V 690 V P kW 30
For use with PKE32 basic device
Connection to SmartWire-DT with PKE-SWD-32
or PKE-SWD-SP
Motor rating
Motor rating
AC-3
Rated motor current
220 V
230 V
240 V
380 V
400 V
415 V
440 V
500 V
660 V
690 V
P I I I I I
kW A A A A A
2.2 8.7 - - - -
3 11.5 - - - -
4 14.8 8.5 - - -
5.5 19.6 11.3 10.2 9 -
7.5 26.4 15.2 13.8 12.1 8.8
11 - 21.7 19.8 17.4 12.6
15 - 29.3 26.6 23.4 17
18.5 - - - 28.9 20.9
22 -       23.8
30 -       32
Technical data
General
Standards IEC/EN 60947, VDE 0660,
UL 508, CSA C 22.2 No. 14
Climatic proofing Damp heat, constant, to IEC 60068-2-78
Damp heat, cyclic, to IEC 60068-2-30
Ambient temperature °C
Storage ϑ °C -40 - +80
Open °C -20 - +55
Enclosed °C -20 - +40
Direction of incoming supply as required
Degree of protection
Device IP20
Terminations IP00
Busbar tag shroud to EN 50274 Finger- and back-of-hand proof
Mechanical shock resistance
half-sinusoidal shock 10 ms
to IEC 60068-2-27
g 25
Altitude m Max. 2000
Main conducting paths
Rated impulse withstand voltage Uimp V AC 6000
Overvoltage category/pollution degree   III/3
Rated operational voltage Ue V AC 690
Rated uninterrupted current =
rated operational current
Iu = Ie A 32
Rated frequency f Hz 40 - 60
Maximum operating frequency   Ops./h  
Max. operating frequency   Ops/h 60
Motor switching capacity kArms  
AC-3 (up to 690 V) A 32
Trip blocks
Temperature compensation °C -5 - +40 (to IEC/EN 60947, VDE 0660)
-25 - +55 (operating range)
Temperature compensation
residual error for T > 40 °C
± 55 (Arbeitsbereich)
Setting range of overload releases 0.25 - 1 x Iu
Fixed short-circuit release Trip block 15 x Ir
delayed approx. 60 ms
Short-circuit release tolerance ± 20%
Phase-failure sensitivity yes
Data for design verification according to IEC/EN 61439
Technical data for design verification
Rated operational current for
specified heat dissipation
In A 32
Heat dissipation capacity Pdiss W 0
IEC/EN 61439 design verification
10.2 Strength of materials and parts  
10.2.2 Corrosion resistance Meets the product standard's requirements.
10.2.3.1 Verification
of thermal stability of enclosures
Meets the product standard's requirements.
10.2.3.2 Verification of resistance of
insulating materials to normal heat
Meets the product standard's requirements.
10.2.3.3 Verification of resistance of
insulating materials to abnormal heat
and fire due to internal electric effects
Meets the product standard's requirements.
10.2.4 Resistance
to ultra-violet (UV) radiation
Meets the product standard's requirements.
10.2.5 Lifting Does not apply,
since the entire switchgear
needs to be evaluated.
10.2.6 Mechanical impact Does not apply,
since the entire switchgear
needs to be evaluated.
10.2.7 Inscriptions Meets the product standard's requirements.
10.3 Degree of protection of ASSEMBLIES Does not apply,
since the entire switchgear
needs to be evaluated.
10.4 Clearances and creepage distances Meets the product standard's requirements.
10.5 Protection against electric shock Does not apply,
since the entire switchgear
needs to be evaluated.
10.6 Incorporation of
switching devices and components
Does not apply,
since the entire switchgear
needs to be evaluated.
10.7 Internal electrical circuits
and connections
Is the panel builder's responsibility.
10.8 Connections
for external conductors
Is the panel builder's responsibility.
10.9 Insulation properties  
10.9.2 Power-frequency electric strength Is the panel builder's responsibility.
10.9.3 Impulse withstand voltage Is the panel builder's responsibility.
10.9.4 Testing of enclosures
made of insulating material
Is the panel builder's responsibility.
10.10 Temperature rise The panel builder is responsible for the
temperature rise calculation.
Eaton will provide heat dissipation
data for the devices.
10.11 Short-circuit rating Is the panel builder's responsibility.
The specifications for the switchgear
must be observed.
10.12 Electromagnetic compatibility Is the panel builder's responsibility.
The specifications for the switchgear
must be observed.
10.13 Mechanical function The device meets the requirements,
provided the information in the
instruction leaflet (IL) is observed.
Technical data ETIM 5.0
Low-voltage industrial components (EG000017) /
Tripping bloc for power circuit-breaker (EC000617)
Electric engineering, automation, process control engineering / Low-voltage switch technology /
Circuit breaker (LV < 1 kV) / Releasing block for circuit breakers
(ecl@ss8-27-37-04-10 [AKF008009])
Setting range overload protector A 8 - 32
Initial value of the undelayed
short-circuit release - setting range
A 8
End value adjustment range
undelayed short-circuit release
A 384
Rated permanent current Iu A 32
Number of poles 3
Short-circuit release function Delayed

Let our expert sales staff guide you through finding the right products to fit your needs. CALL 866-595-9616.