NZMH9-250/ZM9A-80. Purchase direct from KM Parts USA.

Klockner M22 pushbuttons, pilot lights, selector switches along with fully populated custom push button stations

Klockner Moeller PKZ2

Moeller Circuit Breakers

Klockner Moeller N6 and N9 Disconnect Switches

Moeller MI4 and MV4 touch screen and operator interface panels for PLC's

Klockner-Moeller Motor Control and Automation Experts
Klockner Moeller Motor Control and Automation Experts

Call our Immediate Response Team
1-866-595-9616

NZMH9-250/ZM9A-80
Circuit Breakers

When ordering the NZMH9, you will need:

1) The full # off of the label (color may vary) example: NZM9-250
2) The full # off the black label on the overload module example: Zm9-200-obi
3) Any adjustment knobs settings if applicable.

NOTE:
State type, example: NZM9-250/ZM9A-250-NA
Optionally, select a substitute magnetic trip range and insert the bold number into type number, example: NZM9-250/ZM9A-250-2000-NA

NZM9-xxx/ZM9-xxx-CNA and NZMH9-xxx/ZM9-xxx-CNA disconnect switches are UL recognized (UL 508) and CSA certified (C22.2 Nr. 14) 3-pole HP rated manual motor disconnects with built-in thermal trips for motor overload protection. An adjustable dial on the front of the switch can be set to the motor
full load current.

NZM9-xxx/ZM9-xxx-CNA and NZMH9-xxx/ZM9-xxx-CNA disconnect switches are CE marked and in conformity with IEC/EN 60 947-2 (circuit breakers), which makes them suitable internationally as inverse time molded case circuit breakers with adjustable thermal and magnetic trips.

The NZMH9-250/ZM9A-80 instantaneous trip circuit breaker features a current-limiting design contact
assembly and can provide high fault short circuit current ratings of up to 85kA at 480V AC.

Return to NZMH9

Legacy Circuit Breakers

To receive superior tech support, customer service or immediate delivery with your Klockner Moeller
NZMH9-250/ZM9A-80 purchase call us toll free today at: 866-595-9616

Need a different Circuit Breaker?