Klockner Moeller |
|
| TERMINAL | MAXIMUM RATED CURRENT |
CONDUCTOR CROSS-SECTION RANGE AND MATERIAL | TYPE ARTICLE NUMBER |
SINGLE CABLE CLAMP n Not supplied with terminal cover. |
350 | 250 - 500 kcmil Cu only |
K300-NZM10 034937 |
DOUBLE CABLE CLAMP n Not supplied with terminal cover |
500 | 2 x AWG 3/0 - 250 kcmil Cu Only |
K2X120-NZM10 034938 |
TERMINAL n Supplied with 3 terminal covers H-NZM10 and an insulating plate onto which the circuit breaker is mounted |
600 | 2 x AWG 2 - 500 kcmil Cu/Al |
K2X240IP-NZM10-0 Mounted on top 063925 |
K2X240IP-NZM10-U Mounted on bottom 063923 |
|||
TERMINAL n Supplied with 1 terminal cover (type H-NZM10) and an insulating plate onto which the circuit breaker is mounted |
600 | 2 x AWG 2 - 500 kcmil Cu/Al |
K2X240IP-NZM10 063927 |
TERMINAL n Supplied with 1 terminal cover (type H-NZM10) |
600 | 2 x AWG 2 - 500 kcmil Cu/Al |
K2X240-NZM10 034939 |
|
| 1. Overload Relay | 2. Amplifier modules or suppressor circuit |
| 3. Pneumatic timer modules | 4. Mechanical latching modules |
| 5. Additional 4th pole from DIL0M(-G) | 6.Top mounting auxiliary contact |
| 7. Side mounting auxiliary contact | Enclosure |
Return to NZM10 |
Return to NZM10 Accessories |