Klockner Moeller |
 NZM10 inverse time molded case circuit breakers are made up of a switch block and protective trip module. Switch blocks and trip modules can be ordered separately and combined per the two tables shown below to suit any particular application. |
| CIRCUIT BREAKER | SWITCH BLOCK RATINGS CONTINUOUS CURRENT |
TYPE Article Number |
SWITCH BLOCK SUITABLE FOR INSERTION OF TRIP MODULES NZM10 switch blocks make up a complete breaker minus the protective trip module. Add a trip module from the below table to complete the break assembly. |
400 | |
| 400 | ||
| 400 | ||
| 600 | ||
| 600 | ||
| 600 | NZM10-600H-NA |
|
| ê THE TABLE BELOW SHOWS WHICH TRIP MODULE CAN BE USED WITH THE SWITCH BLOCKS INDICATED IN THIS TABLE. | ||
INVERSE TIME CIRCUIT BREAKER COMPONENTS, 600A, 600 VAC SWITCH BLOCKS, SOLID STATE TRIP MODULES Compatible trip modules will easily fit into the front part of the switch block. Incompatible trip modules and switch block combinations are mechanically blocked to prevent creation of improper combinations. |
||||||
| TRIP MODULE | LONG TIME RESPONSE CURRENT SETTING | ADJUSTABLE INSTANTANEOUS PICK UP SETTING | ADJUSTABLE SHORT TIME DELAY PICK UP SETTING FOR SELECTIVITY IN NETWORKS
TIME DELAY RANGE: 0-1000 ms |
COMPATABILITY OF SWITCH BLOCK WITH TRIPLE MODULE Checks (ü) in each row indicate which trip module can be used with the switch block type show in above table. Dashes (-) indicate incompatibility. |
TYPE Article Number |
|
| NZM10-400... | NZM10-600... | |||||
FIXED LONG TIME RESPONSE SETTINGS |
150 | 300 - 1800 | ü | ü | ZMA-150-NZM10-NA 226742 |
|
| 175 | 350 - 2100 | ü | ü | ZMA-175-NZM10-NA 226743 |
||
| 200 | 400 - 2400 | ü | ü | ZMA-200-NZM10-NA 063952 |
||
| 225 | 450 - 2700 | ü | ü | ZMA-225-NZM10-NA 063953 |
||
| 250 | 500 - 3000 | ü | ü | ZMA-250-NZM10-NA 063947 |
||
| 300 | 600 - 3600 | ü | ü | ZMA-300-NZM10-NA 063946 |
||
| 350 | 700 - 4200 | ü | ü | ZMA-350-NZM10-NA 063945 |
||
| 400 | 800 - 4800 | ü | ü | ZMA-400-NZM10-NA 063944 |
||
| 500 | 1000 - 6000 | - | ü | ZMA-500-NZM10-NA 063943 |
||
| 600 | 1200 - 7200 | - | ü | ZMA-600-NZM10-NA 063942 |
||
ADJUSTABLE LONG TIME RESPONSE SETTINGS |
125 - 250 | 250 - 3000 | ü | ü | ZM-250-NZM10-NA 226741 |
|
| 200 - 400 | 400 - 4800 | ü | ü | ZM-400-NZM10-NA 063948 |
||
| 300 - 600 | 600 - 7200 | - | ü | ZM-600-NZM10-NA 063949 |
||
FOR SELECTIVITY IN NETWORKS
FIXED LONG TIME RESPONSE SETTING Features of ZMV(A) trip modules used for selectivity n Fixed (ZMVA...) or adjustable (ZMV...) long time response current(2, 4, 6, 8, 10, 12, 14, 17, 20 seconds). n Adjustable time delay (2-20 sec) for current levels at 6x the long time response current(lr). n Long time response current can be disconnected (tr=00). n Adjustable time delay pick up setting (0, 10, 50, 100, 150, 200, 300, 500, 750, 1000 ms). n Adjustable instantaneous pick up response. NOTE: ZMVA trip modules cannot be combined with NZM10-400H-NA and NZM10-600H-NA switch blocks.
|
200 | 1000 - 9000 | 2 - 12 x Ir | ü | ü | ZMVA-200-NZM10-NA 063941 |
| 225 | 1000 - 9000 | 2 - 12 x Ir | ü | ü | ZMVA-225-NZM10-NA 063940 |
|
| 250 | 1000 - 9000 | 2 - 12 x Ir | ü | ü | ZMVA-250-NZM10-NA 063939 |
|
| 300 | 1000 - 9000 | 2 - 12 x Ir | ü | ü | ZMVA-300-NZM10-NA 063938 |
|
| 350 | 1000 - 9000 | 2 - 12 x Ir | ü | ü | ZMVA-350-NZM10-NA 063937 |
|
| 400 | 1000 - 9000 | 2 - 12 x Ir | ü | ü | ZMVA-400-NZM10-NA 063936 |
|
| 500 | 1000 - 9000 | 2 - 12 x Ir | - | ü | ZMVA-500-NZM10-NA 063935 |
|
| 600 | 1000 - 9000 | 2 - 12 x Ir | - | ü | ZMVA-600-NZM10-NA 063934 |
|
FOR SELECTIVITY IN NETWORKS
ADJUSTABLE LONG TIME RESPONSE SETTING
NOTE: ZMV trip modules cannot be combined with NZM10-400H-NA and NZM10-600H-NA switch blocks. |
200 - 400 | 1000 - 9000 | 400...4800 | ü | ü | ZMV-400-NZM10-NA 063950 |
| 300 - 600 | 1000 - 9000 | 600...7200 | - | ü | ZMV-600-NZM10-NA 063951 |
|
|
| 1. Overload Relay | 2. Amplifier modules or suppressor circuit |
| 3. Pneumatic timer modules | 4. Mechanical latching modules |
| 5. Additional 4th pole from DIL0M(-G) | 6.Top mounting auxiliary contact |
| 7. Side mounting auxiliary contact | 8. Enclosure |
Return to NZM10 |
Return to NZM10 Accessories |